PNP
function [x,y,typ]=PNP(job,arg1,arg2)
// Copyright INRIA
// the automatically generated interface block for Modelica PNP.mo model
// - avec un dialogue de saisie de parametre
x=[];y=[];typ=[];
select job
case 'plot' then
standard_draw(arg1,%f,PNP_draw_ports)
case 'getinputs' then
[x,y,typ]=PNP_inputs(arg1)
case 'getoutputs' then
[x,y,typ]=PNP_outputs(arg1)
case 'getorigin' then
[x,y]=standard_origin(arg1)
case 'set' then
x=arg1;
graphics=arg1.graphics;exprs=graphics.exprs
model=arg1.model;
x=arg1
exprs=x.graphics.exprs
while %t do
[ok,Bf,Br,Is,Vak,Tauf,Taur,Ccs,Cje,Cjc,Phie,Me,Phic,Mc,Gbc,Gbe,Vt,EMinMax,exprs]=getvalue(["Set PNP block parameters:";"";],["Bf : Forward beta";"Br : Reverse beta";"Is : Transport saturation current";"Vak : Early voltage (inverse), 1/Volt";"Tauf: Ideal forward transit time";"Taur: Ideal reverse transit time";"Ccs : Collector-substrat(ground) cap.";"Cje : Base-emitter zero bias depletion cap.";"Cjc : Base-coll. zero bias depletion cap.";"Phie: Base-emitter diffusion voltage";"Me : Base-emitter gradation exponent";"Phic: Base-collector diffusion voltage";"Mc : Base-collector gradation exponent";"Gbc : Base-collector conductance";"Gbe : Base-emitter conductance";"Vt : Voltage equivalent of temperature";"EMinMax: if x > EMinMax, the exp(x) function is linearized"],list("vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1,"vec",1),exprs)
if ~ok then break,end
x.model.equations.parameters(2)=list(Bf,Br,Is,Vak,Tauf,Taur,Ccs,Cje,Cjc,Phie,Me,Phic,Mc,Gbc,Gbe,Vt,EMinMax)
x.graphics.exprs=exprs
break
end
case 'define' then
ModelName="PNP"
PrametersValue=[50;0.1;0;0.02;1.200D-10;5.000D-09;1.000D-12;4.000D-13;5.000D-13;0.8;0.4;0.8;0.333;1.000D-15;1.000D-15;0.02585;40]
ParametersName=["Bf";"Br";"Is";"Vak";"Tauf";"Taur";"Ccs";"Cje";"Cjc";"Phie";"Me";"Phic";"Mc";"Gbc";"Gbe";"Vt";"EMinMax"]
model=scicos_model()
Typein=[];Typeout=[];MI=[];MO=[]
P=[100,90,-2,0;0,50,2,0;100,10,-2,0]
PortName=["C";"B";"E"]
for i=1:size(P,'r')
if P(i,3)==1 then Typein= [Typein; 'E'];MI=[MI;PortName(i)];end
if P(i,3)==2 then Typein= [Typein; 'I'];MI=[MI;PortName(i)];end
if P(i,3)==-1 then Typeout=[Typeout;'E'];MO=[MO;PortName(i)];end
if P(i,3)==-2 then Typeout=[Typeout;'I'];MO=[MO;PortName(i)];end
end
model=scicos_model()
mo=modelica()
model.sim=ModelName;
mo.inputs=MI;
mo.outputs=MO;
model.rpar=PrametersValue;
mo.parameters=list(ParametersName,PrametersValue,zeros(ParametersName));
exprs=["50";"0.1";"1.e-16";"0.02";"0.12e-9";"5e-9";"1e-12";"0.4e-12";"0.5e-12";"0.8";"0.4";"0.8";"0.333";"1e-15";"1e-15";"0.02585";"40"]
gr_i=["";"if orient then";" xpolys(orig(1)+[0.45,0.45,1,0.65,0.45,0.65;0.45,0.005,0.65,0.45,0.65,0.995]*sz(1),orig(2)+[0.8333333,0.5,0.9166667,0.9166667,0.4166667,0.0833333;0.1666667,0.5,0.9166667,0.5833333,0.0833333,0.0833333]*sz(2),[1,1,1,1,1,1])";" xset(''color'',0)";" xfpolys(orig(1)+[0.45;0.525;0.485;0.45]*sz(1),orig(2)+[0.4166667;0.3583333;0.2916667;0.4166667]*sz(2),2)";"else";" xpolys(orig(1)+[0.55,0.55,0,0.35,0.55,0.35;0.55,0.995,0.35,0.55,0.35,0.005]*sz(1),orig(2)+[0.8333333,0.5,0.9166667,0.9166667,0.4166667,0.0833333;0.1666667,0.5,0.9166667,0.5833333,0.0833333,0.0833333]*sz(2),[1,1,1,1,1,1])";" xset(''color'',0)";" xfpolys(orig(1)+[0.55;0.475;0.515;0.55]*sz(1),orig(2)+[0.4166667;0.3583333;0.2916667;0.4166667]*sz(2),2)";"end"]
model.blocktype='c'
model.dep_ut=[%f %t]
mo.model=ModelName
model.equations=mo
model.in=ones(size(MI,'*'),1)
model.out=ones(size(MO,'*'),1)
x=standard_define([2,1.2],model,exprs,list(gr_i,0))
x.graphics.in_implicit=Typein;
x.graphics.out_implicit=Typeout;
end
endfunction
//=========================
function PNP_draw_ports(o)
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
xset('pattern',default_color(0))
// draw input/output ports
//------------------------
// [x_in_Icon,y_in_Icon,type(2=imp_in/-2:imp_out/1=exp_input/-1_exp_output),orientation(degree)]
P=[100,90,-2,0;0,50,2,0;100,10,-2,0]
//============================
// setting the input/ outputs and direction
// implicit port: if it's located in the right it's output and while,
// else black
// explicit ports:
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
xset('pattern',default_color(1))
xset('thickness',1)
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if P(i,3)==1 then // explicit
inR=in*R;
xfpoly(orig(1)+inR(:,1)+P(i,1)*sz(1)/100,orig(2)+inR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-1 then
outR=out*R;
xfpoly(orig(1)+outR(:,1)+P(i,1)*sz(1)/100,orig(2)+outR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==2 then // deciding the port's color: black, if x<sz(1)/2 else white.
in2R=in2*R;
xfpoly(orig(1)+in2R(:,1)+P(i,1)*sz(1)/100,orig(2)+ in2R(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-2 then // deciding the port's color: black, if x<sz(1)/2 else white.
out2R=out2*R;
xpoly(orig(1)+out2R(:,1)+P(i,1)*sz(1)/100,orig(2)+ out2R(:,2)+P(i,2)*sz(2)/100, 'lines',1)
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if P(i,3)==1 then // explicit
inR=in*R;
xfpoly(orig(1)+sz(1)-inR(:,1)-P(i,1)*sz(1)/100,orig(2)+inR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-1 then // explicit
outR=out*R;
xfpoly(orig(1)+sz(1)-outR(:,1)-P(i,1)*sz(1)/100,orig(2)+outR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==2 then // deciding the port's color: black, if x<sz(1)/2 else white.
in2R=in2*R;
xfpoly(orig(1)+sz(1)-in2R(:,1)-P(i,1)*sz(1)/100,orig(2)+ in2R(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-2 then // deciding the port's color: black, if x<sz(1)/2 else white.
out2R=out2*R;
xpoly(orig(1)+sz(1)-out2R(:,1)-P(i,1)*sz(1)/100,orig(2)+ out2R(:,2)+P(i,2)*sz(2)/100, 'lines',1)
end
end
end
endfunction
//=========================
function [x,y,typ]=PNP_inputs(o)
// Copyright INRIA
xf=60
yf=40
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
//[orig,sz,orient]=o(2)(1:3);
inp=size(o.model.in,1);clkinp=size(o.model.evtin,1);
// [x_in_Icon,y_in_Icon,type(2=imp/1=exp_input/-1_exp_output),orientation(degree)]
P=[100,90,-2,0;0,50,2,0;100,10,-2,0]
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
x=[];y=[];typ=[]
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==1 then // explicit_input
inR=in($,:)*R;
x=[x,orig(1)+inR(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+inR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==2) then // implicit
in2R=in2($,:)*R;
x=[x,orig(1)+in2R(:,1)+P(i,1)*sz(1)/100];// Black
y=[y,orig(2)+in2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==1 then // explicit_input
inR=in($,:)*R;
x=[x,orig(1)+sz(1)-inR(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+inR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==2) then // implicit
in2R=in2($,:)*R;
x=[x,orig(1)+sz(1)-in2R(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+in2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
end
endfunction
//=========================
function [x,y,typ]=PNP_outputs(o)
// Copyright INRIA
xf=60
yf=40
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
out=size(o.model.out,1);clkout=size(o.model.evtout,1);
P=[100,90,-2,0;0,50,2,0;100,10,-2,0]
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
x=[];y=[];typ=[];
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==-1 then // explicit_output
outR=out($,:)*R;
x=[x,orig(1)+outR(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+outR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==-2) then // implicit
out2R=out2($,:)*R;
x=[x,orig(1)+out2R(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+out2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==-1 then // explicit_output
outR=out($,:)*R;
x=[x,orig(1)+sz(1)-outR(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+outR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==-2) then // implicit
out2R=out2($,:)*R;
x=[x,orig(1)+sz(1)-out2R(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+out2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
end
endfunction