CCS
function [x,y,typ]=CCS(job,arg1,arg2)
// Copyright INRIA
// the automatically generated interface block for Modelica CCS.mo model
// - avec un dialogue de saisie de parametre
x=[];y=[];typ=[];
select job
case 'plot' then
standard_draw(arg1,%f,CCS_draw_ports)
case 'getinputs' then
[x,y,typ]=CCS_inputs(arg1)
case 'getoutputs' then
[x,y,typ]=CCS_outputs(arg1)
case 'getorigin' then
[x,y]=standard_origin(arg1)
case 'set' then
x=arg1;
graphics=arg1.graphics;exprs=graphics.exprs
model=arg1.model;
x=arg1
case 'define' then
ModelName="CCS"
PrametersValue=[]
ParametersName=[]
model=scicos_model()
Typein=[];Typeout=[];MI=[];MO=[]
P=[2,50,1,0; 70,98,2,0;70,2,-2,0]
PortName=["Iin";"n";"p"]
for i=1:size(P,'r')
if P(i,3)==1 then Typein= [Typein; 'E'];MI=[MI;PortName(i)];end
if P(i,3)==2 then Typein= [Typein; 'I'];MI=[MI;PortName(i)];end
if P(i,3)==-1 then Typeout=[Typeout;'E'];MO=[MO;PortName(i)];end
if P(i,3)==-2 then Typeout=[Typeout;'I'];MO=[MO;PortName(i)];end
end
model=scicos_model()
mo=modelica()
model.sim=ModelName;
mo.inputs=MI;
mo.outputs=MO;
model.rpar=PrametersValue;
mo.parameters=list(ParametersName,PrametersValue,zeros(ParametersName));
exprs=[]
gr_i=["";"if orient then";" xpolys(orig(1)+[0.7142857,0.7142857,0.3714286,0.0571429,0.3714286;0.7142857,0.7142857,0.4285714,0.4142857,0.4285714]*sz(1),orig(2)+[0.7,0,0.53,0.49,0.45;0.98,0.3,0.49,0.49,0.49]*sz(2),[2,2,6,6,6])";" xstring(orig(1)+0.7714286*sz(1),orig(2)+0.75*sz(2),""CCS"")";" xpolys(orig(1)+[0.7142857,0.7142857,0.7142857;0.7142857,0.6,0.8285714]*sz(1),orig(2)+[0.35,0.63,0.63;0.63,0.55,0.55]*sz(2),[5,5,5])";" xrects([orig(1)+0.4285714*sz(1); orig(2)+0.7*sz(2);0.5714286*sz(1);0.4*sz(2)],0)";"else";" xpolys(orig(1)+[0.2857143,0.2857143,0.6285714,0.9428571,0.6285714;0.2857143,0.2857143,0.5714286,0.5857143,0.5714286]*sz(1),orig(2)+[0.7,0,0.53,0.49,0.45;0.98,0.3,0.49,0.49,0.49]*sz(2),[2,2,6,6,6])";" xstring(orig(1)+sz(1)-(0.7714286*sz(1)),orig(2)+0.75*sz(2),""CCS"")";" xpolys(orig(1)+[0.2857143,0.2857143,0.2857143;0.2857143,0.4,0.1714286]*sz(1),orig(2)+[0.35,0.63,0.63;0.63,0.55,0.55]*sz(2),[5,5,5])";" xrects([orig(1)+0*sz(1); orig(2)+0.7*sz(2);0.5714286*sz(1);0.4*sz(2)],0)";"end"]
model.blocktype='c'
model.dep_ut=[%f %t]
mo.model=ModelName
model.equations=mo
model.in=ones(size(MI,'*'),1)
model.out=ones(size(MO,'*'),1)
x=standard_define([2.1,3],model,exprs,list(gr_i,0))
x.graphics.in_implicit=Typein;
x.graphics.out_implicit=Typeout;
end
endfunction
//=========================
function CCS_draw_ports(o)
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
xset('pattern',default_color(0))
// draw input/output ports
//------------------------
// [x_in_Icon,y_in_Icon,type(2=imp_in/-2:imp_out/1=exp_input/-1_exp_output),orientation(degree)]
P=[2,50,1,0; 70,98,2,0;70,2,-2,0]
//============================
// setting the input/ outputs and direction
// implicit port: if it's located in the right it's output and while,
// else black
// explicit ports:
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
xset('pattern',default_color(1))
xset('thickness',1)
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if P(i,3)==1 then // explicit
inR=in*R;
xfpoly(orig(1)+inR(:,1)+P(i,1)*sz(1)/100,orig(2)+inR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-1 then
outR=out*R;
xfpoly(orig(1)+outR(:,1)+P(i,1)*sz(1)/100,orig(2)+outR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==2 then // deciding the port's color: black, if x<sz(1)/2 else white.
in2R=in2*R;
xfpoly(orig(1)+in2R(:,1)+P(i,1)*sz(1)/100,orig(2)+ in2R(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-2 then // deciding the port's color: black, if x<sz(1)/2 else white.
out2R=out2*R;
xpoly(orig(1)+out2R(:,1)+P(i,1)*sz(1)/100,orig(2)+ out2R(:,2)+P(i,2)*sz(2)/100, 'lines',1)
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if P(i,3)==1 then // explicit
inR=in*R;
xfpoly(orig(1)+sz(1)-inR(:,1)-P(i,1)*sz(1)/100,orig(2)+inR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-1 then // explicit
outR=out*R;
xfpoly(orig(1)+sz(1)-outR(:,1)-P(i,1)*sz(1)/100,orig(2)+outR(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==2 then // deciding the port's color: black, if x<sz(1)/2 else white.
in2R=in2*R;
xfpoly(orig(1)+sz(1)-in2R(:,1)-P(i,1)*sz(1)/100,orig(2)+ in2R(:,2)+P(i,2)*sz(2)/100,1)
end
if P(i,3)==-2 then // deciding the port's color: black, if x<sz(1)/2 else white.
out2R=out2*R;
xpoly(orig(1)+sz(1)-out2R(:,1)-P(i,1)*sz(1)/100,orig(2)+ out2R(:,2)+P(i,2)*sz(2)/100, 'lines',1)
end
end
end
endfunction
//=========================
function [x,y,typ]=CCS_inputs(o)
// Copyright INRIA
xf=60
yf=40
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
//[orig,sz,orient]=o(2)(1:3);
inp=size(o.model.in,1);clkinp=size(o.model.evtin,1);
// [x_in_Icon,y_in_Icon,type(2=imp/1=exp_input/-1_exp_output),orientation(degree)]
P=[2,50,1,0; 70,98,2,0;70,2,-2,0]
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
x=[];y=[];typ=[]
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==1 then // explicit_input
inR=in($,:)*R;
x=[x,orig(1)+inR(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+inR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==2) then // implicit
in2R=in2($,:)*R;
x=[x,orig(1)+in2R(:,1)+P(i,1)*sz(1)/100];// Black
y=[y,orig(2)+in2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==1 then // explicit_input
inR=in($,:)*R;
x=[x,orig(1)+sz(1)-inR(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+inR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==2) then // implicit
in2R=in2($,:)*R;
x=[x,orig(1)+sz(1)-in2R(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+in2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
end
endfunction
//=========================
function [x,y,typ]=CCS_outputs(o)
// Copyright INRIA
xf=60
yf=40
[orig,sz,orient]=(o.graphics.orig,o.graphics.sz,o.graphics.flip)
out=size(o.model.out,1);clkout=size(o.model.evtout,1);
P=[2,50,1,0; 70,98,2,0;70,2,-2,0]
in= [-1 -1; 1 0;-1 1; -1 -1; -1 0]*diag([xf/28,yf/28]) ;// left_triangle
out= [-1 -1; 1 0;-1 1; -1 -1; 1 0]*diag([xf/28,yf/28]) ;// downward_triangle
in2= [-1 -1; 1 -1; 1 1; -1 1; -1 -1; 0 0]*diag([xf/28,yf/28])
out2=[ 1 1;-1 1;-1 -1; 1 -1; 1 1; 0 0]*diag([xf/28,yf/28])
x=[];y=[];typ=[];
if orient then
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==-1 then // explicit_output
outR=out($,:)*R;
x=[x,orig(1)+outR(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+outR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==-2) then // implicit
out2R=out2($,:)*R;
x=[x,orig(1)+out2R(:,1)+P(i,1)*sz(1)/100];
y=[y,orig(2)+out2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
else
for i=1:size(P,'r')
theta=P(i,4)*%pi/180;
R=[cos(theta),sin(theta);sin(-theta),cos(theta)];
if (P(i,3))==-1 then // explicit_output
outR=out($,:)*R;
x=[x,orig(1)+sz(1)-outR(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+outR(:,2)+P(i,2)*sz(2)/100];
typ=[typ,1];
end
if(P(i,3)==-2) then // implicit
out2R=out2($,:)*R;
x=[x,orig(1)+sz(1)-out2R(:,1)-P(i,1)*sz(1)/100];
y=[y,orig(2)+out2R(:,2)+P(i,2)*sz(2)/100];
typ=[typ,2];
end
end
end
endfunction